 |
🧳 EVA Nylon Waterproof Transmitter Bag (260x260x120mm)
I picked this waterproof transmitter carrying case for my Radiomaster TX12 mainly because I needed something sturdy and compact for field trips and travel. The EVA nylon construction and the thick padding stood out, especially compared to the flimsy, overpriced alternatives I saw on US sites.
When the bag arrived (shipping took around 12 days to the Midwest), I was genuinely surprised by the quality. The semi-hard shell feels tough, the zipper runs smoothly, and the inner mesh and padding protect the transmitter really well. It’s snug enough for my TX12 with a few add-ons, but probably not ideal for chunkier gear without a little rearranging.
Pros: ✅ Lightweight and durable ✅ Water-resistant outer shell ✅ Foam inserts for custom fit ✅ Half the price of similar US bags
Cons: ❌ No shoulder strap ❌ Might not fit larger accessories
This bag would easily run $40–50 locally, but I paid just under $20. Totally worth it. It exceeded expectations and made me feel like I wasn’t compromising quality just to save a buck.
US $10.58
 |
🎮 STPHOBBY Transparent Resin Radio Stick Ends (2PCS)
I grabbed these resin radio stick ends after seeing rave reviews about their grip and compatibility with my TX16S. I fly both freestyle quads and wings, and sweaty thumbs are the enemy of precision. These seemed like a simple upgrade.
The fit is secure, and the texture — slightly tacky with a semi-gloss finish — adds surprisingly more control than the stock ends. I installed them in under a minute with no issues. They hold tight, and the transparency adds a subtle custom touch.
Pros: ✅ Excellent grip, even in warm weather ✅ Quick installation ✅ Feels premium, looks custom
Cons: ❌ Only two color options ❌ Packaging was a bit too minimal
Paid just $6.50 for the pair — in the US, similar upgrades cost $15+. I’d definitely buy these again.
US $13.7
 |
🧢 RadioMaster TX16S Silicone Switch Covers (12PCS)
I always wanted to protect the switches on my TX16S, especially when transporting it in a bag with tools and batteries. These colored silicone switch covers looked fun and practical.
They popped right onto the toggles with no fuss. I love that they’re color-coded and labeled — it’s honestly helped me remember my custom switch assignments mid-flight. The silicone feels thick and durable but still flexible enough not to impede switch movement.
Pros: ✅ Helps identify switches fast ✅ Feels soft but protective ✅ Bright colors and easy labeling
Cons: ❌ A bit bulky on smaller switches ❌ Could include a few extra sizes
These cost under $4 on AliExpress — in hobby stores, I’ve seen similar sets go for $10–12. Definitely exceeded expectations.
US $6.46
 |
📦 Universal RC Transmitter Storage Bag for TX16S / T18 / FrSky X9D
I bought this universal radio transmitter bag as a second case to store my backup Jumper T16. I wasn’t expecting much — I mainly needed dust protection — but this thing is fantastic for the price.
The interior foam is shaped to fit most large transmitters perfectly. There’s room for a few accessories, and the handle is solid. The shell is semi-rigid and holds its shape well. It arrived in 11 days, no dents, no weird smells, no defects.
Pros: ✅ Universally sized for most big RC radios ✅ Solid zipper, neat stitching ✅ Lightweight but strong
Cons: ❌ Foam insert not removable ❌ Doesn’t include any inner pockets
Compared to Pelican-style cases costing $70+, this was a steal at just $16. Would buy again in a heartbeat.
US $11.35
 |
🔋 18650 Battery Case for TX16S / Jumper T16
I needed a spare 18650 battery tray for my TX16S because I alternate between LiPos and 18650s. This one came up a lot in RC groups, and I liked that it had a three-wire system pre-installed.
The tray fit right into the radio’s slot. Soldering wasn’t required — the wires were already pre-stripped. Contact points were clean, and batteries don’t rattle. I’ve flown multiple sessions on a fresh 2×18650 pair without issues.
Pros: ✅ Pre-wired for easy install ✅ Sturdy plastic frame ✅ Great fit — no modding needed
Cons: ❌ No instructions included ❌ Feels slightly cheap in the hand
I paid around $5.50 — compare that to $12–15 in the US for similar builds. Not the fanciest, but it does the job really well.
US $0.99
 |
🛡️ Radiomaster TX16S MKII TPU Gimbal Covers
These TPU gimbal protectors were more of a precaution — I’ve damaged a gimbal before during transit and didn’t want to repeat that. They looked minimalistic and promised protection.
They stretch over the sticks and gimbals like a tight glove. Once on, they don’t fall off easily, but they’re still simple to remove. The TPU material is flexible but thick, and even after 2 weeks of daily use, they haven’t warped or cracked.
Pros: ✅ Perfect snug fit ✅ Prevents gimbal movement in bags ✅ Lightweight and durable
Cons: ❌ No colors to choose from ❌ Slight rubbery smell at first
This cost $3.80 on AliExpress. At a US hobby shop, you’d pay at least $10 for similar protection.
US $10.59
 |
🎒 Radiomaster TX16S Universal Carry Case (33×23.5x12cm)
This large RC radio controller case felt like the grown-up version of the first one I bought. I wanted a case that could hold everything — transmitter, goggle modules, props, chargers — in one.
It’s huge but not bulky. The outer shell is more rigid than I expected, and inside there are compartments and Velcro straps that keep everything from shifting. I’ve taken it out for two weekend flights and haven’t had to carry a second bag.
Pros: ✅ Very spacious ✅ Fits everything in one place ✅ Quality handle and zippers
Cons: ❌ A bit oversized for daily carry ❌ No backpack straps
For around $22, this feels like it could’ve cost $60. Absolute value.
US $30.15
 |
🎒 RADIOMASTER TX12/TX16S/Boxer/Zorro Compact Storage Bag
I use this compact RC controller bag for my Zorro when traveling light. It’s more minimalist but offers great padding and a clean design.
The compact size is ideal for smaller radios like the Boxer and TX12. The zipper is decent, and there’s a soft divider inside to prevent the sticks from rubbing against the inner walls. Shipped in about 10 days.
Pros: ✅ Great for smaller radios ✅ Lightweight and low-profile ✅ Inner divider included
Cons: ❌ No external pockets ❌ Not rigid enough for rough transport
Paid under $14 — compared to similar $30+ options on Amazon, this was a great budget choice.
US $15.13
🛠️ Final Thoughts
Honestly, I wasn’t expecting this level of quality from so many different RC accessories on AliExpress. Every item arrived in 10–14 days, nothing was damaged, and everything I ordered either matched or beat my expectations. The prices were sometimes 50–70% lower than local hobby shops, without sacrificing usability or performance. I’d absolutely recommend all eight products to other RC hobbyists and will definitely be ordering more accessories from AliExpress in the near future.
