 |
Bitfunx Free McBoot Memory Card for PS2
I bought the Bitfunx Free McBoot Memory Card (I picked the 64MB version) because I’ve been revisiting my old PlayStation 2 collection and wanted an easy way to play backups and homebrew. What really sold me was that this card came preloaded with FMCB 1.966 and was plug-and-play—no complicated setup.
Shipping took about two weeks to the US, which honestly surprised me. The card came sealed in anti-static packaging and felt pretty sturdy. Once inserted into my fat PS2, it booted straight into the FMCB menu without a hitch. Everything from launching games off a USB stick to running uLaunchELF worked flawlessly. I appreciated that it supported all region models, which is perfect for my old Japanese SCPH-30000.
Pros:
-
Preloaded and plug-and-play
-
Compatible with all fat PS2 models
-
Fast boot and stable FMCB version
-
Budget-friendly way to revive your PS2
Cons: – The outer plastic feels a little thin compared to Sony originals – Didn’t come with instructions (not a big deal if you’re familiar with FMCB)
In the US, you’d pay over $20 for a similar modded memory card. I paid about $10 here, and it performed just as well. This card exceeded my expectations and saved me time and effort.
US $4.32
 |
Bitfunx MX4SIO SIO2SD Card Adapter for PS2
I grabbed the Bitfunx MX4SIO Adapter as a companion to the FMCB card—wanted to load games straight from a microSD. This adapter fits into the memory card slot and uses an SD-to-PS2 protocol instead of USB, so I expected faster load times.
Out of the box, it’s a simple plastic housing with a microSD slot. The build is basic but functional. It worked immediately once I set up the SD card correctly with the right file format and OPL settings. Load speeds were noticeably quicker than USB, especially for larger games like Gran Turismo 4.
Pros:
-
Great speeds compared to USB loading
-
No external power or wires
-
Simple plug-in design
Cons: – Not compatible with every game (check compatibility lists) – Can be fiddly to format the SD card correctly
This cost me around $12. A similar solution in the US would run closer to $30–$40, assuming you can even find it easily. Overall, it’s a fantastic and efficient way to play games from SD if you’re tech-savvy.
US $3.6
 |
Bitfunx PSxMemCard Gen2 Save Card for PS1/PS2
This Bitfunx PSxMemCard Gen2 was a nostalgic purchase—I have original PS1 and PS2 discs and wanted a fresh save card that works reliably. I chose this because it uses modern flash memory and promised better durability than old, battery-based save systems.
It arrived quickly and worked right away on both my PS1 and PS2. No formatting needed, and it even showed up properly in the PS1 BIOS. I tested it with Final Fantasy VII and Metal Gear Solid and experienced zero save corruptions. Transfers from my older cards using uLaunchELF were smooth.
Pros:
-
Reliable modern flash memory
-
Supports both PS1 and PS2 saves
-
Fully compatible with consoles and clone systems
Cons: – No visual indicator when saving – Slightly pricier than older used Sony cards
At $11 shipped, it was a steal. Original cards on eBay are hit or miss and sometimes go for $20+ in sketchy condition. This worked better than I expected.
US $26.69
 |
RetroScaler2x AV to HDMI Converter
The RetroScaler2x AV-to-HDMI line doubler caught my eye because I wanted to hook my old consoles (N64, PS2, Dreamcast) up to a modern 4K TV without horrible image quality or lag. This device promised line-doubling (480i to 480p) with no input delay.
It came in a sturdy box with cables included. Plugged it into the PS2’s AV out and then into my TV’s HDMI port—it worked instantly. Picture clarity was sharper than I thought possible for AV, and it significantly improved color and sharpness for my SNES and Saturn. Game input was just as responsive as the original AV setup.
Pros:
-
Plug-and-play setup
-
Supports multiple consoles
-
Zero lag, clean image output
-
Compact and lightweight
Cons: – No 720p/1080p upscale – Slightly higher price point for AliExpress
It cost me about $35, which is a bargain compared to OSSC ($120+) or RetroTINK ($100+). It’s not perfect, but it’s very solid and honestly surprised me with its performance.
US $43.57
 |
Bitfunx GameStar SATA HDD Adapter for PS2
The Bitfunx GameStar SATA Adapter was a must-have for me. I already had Free McBoot and wanted to load games from a hard drive for best performance. This SATA version lets you use modern drives, unlike the old IDE-only Sony network adapters.
Installation was straightforward—just opened the PS2’s back panel and slotted the adapter in. Used a 500GB SATA drive formatted with WinHIIP, loaded OPL, and off it went. Game load times are lightning fast. I also liked that it includes network support for LAN play and game transfers.
Pros:
-
Compatible with 2.5″/3.5″ SATA drives
-
Speeds far better than USB
-
LAN support included
Cons: – Build quality is decent but not premium – No instruction manual
This adapter was $18—unheard of for this kind of functionality. U.S. sellers on eBay charge double that. It did exactly what I hoped and made my PS2 feel brand new again.
US $17.06
 |
Bitfunx PSxMemCard Gen2 SD2PSXTD Save Adapter
I added the Bitfunx PSxMemCard Gen2 SD2PSXTD to experiment with SD card saves instead of traditional memory cards. This version lets you save PS1 and PS2 game data directly to microSD through the memory card slot—no more worrying about corrupted saves or space limits.
Setup took a bit of research. You need to format the card correctly and configure it with a loader like FreePSXBoot or FMCB. Once running, I was amazed. It stored multiple save files for various games, allowed easy transfers to PC, and worked on both real hardware and PSIO mods.
Pros:
-
Massive storage on microSD
-
Easy backup and restore
-
Works with original hardware
Cons: – Learning curve to get it working – Not compatible with all third-party loaders
At around $14, it was more affordable than most other flash-based save solutions. I didn’t expect it to work so well, but it impressed me once set up properly.
US $28.92
Final Thoughts
This was one of my best AliExpress hauls to date. Every item worked either out of the box or with minimal setup, and all prices were significantly lower than US alternatives. I’m honestly surprised at the quality and compatibility of these retro gaming accessories—Bitfunx has won me over. If you’re into retro gaming or want to breathe life into your PS2/PS1, I’d recommend any of these products. I’ll definitely be ordering more, especially as I expand my retro setup.
