 |
🧲 Aluminum Magnetic Screw Tray (Blue)
I bought this RC magnetic screw tray because I’m constantly working on my SCX10 rig and keep losing tiny screws on my cluttered desk. The color options were great, and I went with blue—easy to spot among my tools. Delivery took just over two weeks to the US. It came wrapped securely in bubble wrap and had no dents or scratches. Once I started using it, I realized how insanely strong the magnet is—it even held onto small wrenches. It’s compact but deep enough to keep everything contained, even if the bench gets bumped. Pros:
-
Strong magnetic hold
-
Lightweight but sturdy
-
Non-slip rubber base Cons: – Slightly smaller than I expected – Edges could be a bit smoother Compared to similar trays on Amazon that run $12–15, this one cost me around $4.50 on AliExpress, and it’s just as good—if not better. Met expectations? Definitely. It’s now a permanent part of my workstation.
US $2.39
 |
🧲 Aluminum Magnetic Screw Tray (Gold)
I got a second tray in gold to separate hardware by type. The color looks even better in person—has a slight satin finish. No issues with shipping. Same strong magnetic base and solid construction. I now use one tray for body screws and the other for driveline hardware—makes my life a lot easier. Pros:
-
Same build quality as the blue one
-
Finish doesn’t scratch easily Cons: – Minor color variation compared to photos For the price, it’s unbeatable. Most US hobby stores charge way more for lower quality. Met expectations? Absolutely.
US $2.39
 |
🧲 Aluminum Magnetic Screw Tray (Red)
Couldn’t resist grabbing the red version to complete my set. I’m a sucker for color coordination on my workbench. Works exactly like the others—same strong magnet, same durable aluminum body. Pros:
-
Looks sharp
-
Stackable with other trays Cons: – Slight paint smell at first, fades quickly At under $5, this red tray is a smart buy for any RC enthusiast. Met expectations? Yes, and now I recommend getting a few in different colors for organizing.
US $4.32
 |
⚡ 9IMOD 60A Brushed ESC Waterproof
My old ESC burned out mid-crawl, so I went for this 9IMOD 60A ESC after seeing strong reviews and compatibility with my SCX10. Shipping was super quick—11 days. It arrived boxed, with clear labeling and a mini instruction leaflet. Installing it was straightforward, and it handled 2S and 3S batteries with no overheating. I tested it in wet terrain, and it truly is waterproof. The throttle response is smooth, and braking feels precise. Pros:
-
Fully waterproof
-
Compact, lightweight design
-
Supports 3S LiPo Cons: – BEC could be stronger – Wires are a bit stiff A similar ESC in the US would cost $25–35. This was $14, and honestly, I’d buy it again. Met expectations? Exceeded them—cheap, reliable, and runs cool.
US $5.35
 |
💥 100mm Oil Shock Dampers (Silver)
I bought these metal oil-filled shocks for my TRX4 because stock ones leaked constantly. I went with 100mm length—perfect for my setup. Delivery took 16 days. Came in a padded pouch with springs already installed. They feel premium—machined aluminum body, smooth piston action. I filled them with 35wt oil, and now the truck is stable over rough ground. Pros:
-
Fully metal construction
-
No leaks after 10+ runs
-
Adjustable spring tension Cons: – Minor burrs on one collar – Needs oil added manually Similar shocks cost $25+ per pair here. These were under $10 for the set. Met expectations? Totally. Better than most RTR shocks.
US $13.06
|
💥 90mm Oil Shock Dampers (Black)
These 90mm black shocks are installed on my SCX10 II trail rig. Needed slightly shorter travel than my previous setup. Same great build as the 100mm ones. I used 30wt oil here for a softer response. Pros:
-
Great rebound
-
Metal ball ends included Cons: – Paint chipped a little during install Can’t complain for under $10. They outperform some $40 brands. Met expectations? 100%. Smooth and durable.
US $6.53
 |
🔧 Adjustable Shock Absorber Mount
This adjustable aluminum shock mount solved a big problem for me—angle tuning. My rig had a weird lean before. Shipping was a little slower (3 weeks), but worth the wait. Solid block of machined aluminum, multiple mounting holes. I changed the shock angle slightly and gained noticeable flex without compromising stiffness. Pros:
-
High-quality machining
-
Adds tuning flexibility Cons: – Slightly heavier than plastic versions These are $20+ in the US, easy. I paid under $7. Met expectations? Yes, a great tuning upgrade.
US $2.63
 |
🔩 Metal Driveshaft (Black)
Swapped out my plastic shaft for this metal universal driveshaft. Install was super easy, and the spline fit was tight. It’s already survived a couple hard tumbles on rocks without bending. Pros:
-
Telescopic adjustment
-
Steel construction Cons: – Slightly heavier than stock I paid around $6; a similar part at a US hobby shop? Minimum $18. Met expectations? For sure—great durability.
US $4.56
|
🔩 Metal Driveshaft (Silver)
Same model as the black one, just a different color for front/rear differentiation. Works flawlessly. Pros:
-
Identical performance
-
Great finish Cons: – None noticeable so far Met expectations? Totally. Love having two colors for quick ID during maintenance.
US $0.99
 |
📎 Magnetic Body Mount Posts
Bought these magnetic body mounts out of curiosity. I hate dealing with body clips. Took about 2 weeks to arrive. I mounted them on my TRX4 shell and chassis, and now I can pop the body off in seconds. Pros:
-
Strong magnets
-
Sleek look—no pins visible Cons: – Not ideal for extreme crawling (body can pop off on flips) Cost me $8 for 4 posts. Most magnetic mounts in the US run $20+. Met expectations? Yes, but better for light trailing than hardcore crawling.
US $4.08
 |
🛠 RC Work Stand (Red)
This metal repair stand changed the game for my wrenching sessions. It’s height-adjustable and rotates 360 degrees. Super solid build. Rubber pads on top grip the chassis without scratching. Pros:
-
Heavy-duty feel
-
Parts tray included Cons: – Assembly instructions were vague In the US, a comparable stand goes for $30–40. I got this for $12. Met expectations? Exceeded them—it’s now my main bench tool.
US $7.93
 |
🟡 Brass Wheel Hex Hubs (12mm)
Needed extra weight down low for side-hilling. These brass hex hubs fit perfectly on my SCX10 and widened the track slightly. They came in a simple zip bag, with set screws and pins included. Pros:
-
Great fit
-
Noticeably improves stability Cons: – One set screw was stripped (I replaced it) US equivalents go for $15–20. These were $6. Met expectations? Yes—smart upgrade for any crawler.
US $1.51
Overall Verdict
Honestly, I’m impressed. I expected one or two of these items to be duds, but everything performed either as well or better than more expensive US brands. Shipping ranged from 11–21 days, and all items were packaged well. I’m beyond satisfied with this AliExpress haul. For any RC hobbyist looking to stretch their budget without sacrificing quality, these products are legit. I’ll definitely be ordering more upgrades soon.
