![]() |
High-Gain Flat Panel & Mushroom Antenna Combo for FPV Goggles
I picked up this combo set mainly because I recently upgraded to SKY04X goggles and needed a quality antenna system to match. What stood out about this set was the combination of a flat panel 8DBI directional antenna and a mushroom omni antenna—ideal for balancing long-range performance with consistent close-range reception.
Shipping to the US took about 11 days, which is actually faster than I expected from AliExpress. Everything was well-packed, with foam padding around the connectors. Installation was simple—SMA fit perfectly into my goggles, and signal reception noticeably improved, especially on the flat panel side. During a few test flights in open areas, the feed stayed clear and stable way beyond what my old omnidirectional antennas could handle.
Pros: – Strong signal gain on the panel antenna – Good build quality, especially the connectors – Balanced combo of long-range and all-direction reception
Cons: – Slightly heavier than I thought – The mushroom antenna casing feels plasticky compared to brand-name options
Price-wise, I paid around $18 for the combo—whereas something similar on US sites like GetFPV or RDQ would run $35–$40 easily. For that price point, this combo exceeded my expectations. It’s a smart choice for anyone using SKY04X or similar goggles.
US $1.19
![]() |
Lollipop 4 RHCP High Gain Antenna for FPV Drones
I chose the Lollipop 4 RHCP Antenna for one of my freestyle quads because I’ve had good experience with this form factor. It’s small, durable, and lightweight—exactly what’s needed for aggressive flying. The reason I picked this over other budget RHCP options was the consistent praise for signal clarity and durability in crashes.
Out of the box, the finish was solid. I ordered the SMA version, and it mated tightly with my VTX. I’ve crashed it a couple times on concrete, and it didn’t even crack. That’s impressive at this price range.
Pros: – Durable and crash-resistant – Compact and lightweight – RHCP polarization works well with my receiver setup
Cons: – Slightly warm after long flights – The signal performance starts to drop slightly after ~600m
Compared to a TrueRC or Lumenier antenna in the US, which cost $20+, I paid under $10 for this one. Considering the performance, this is one of the best bang-for-buck options out there. Definitely a reliable option for mid-range flying.
US $1.19
![]() |
Rush Cherry 5.8G Long Range Racing Antenna
I’ve been meaning to test the Rush Cherry Antenna for long-range cruising on my 7” quad. It’s marketed as low-loss and highly efficient, and I wanted something compact but powerful.
This one impressed me right away. Signal penetration was better through trees and low spots where other antennas drop out. I ordered both LHCP and RHCP for different setups. The finish is very premium for the price—heat shrink was tight, soldering was clean, and the connector felt solid.
Pros: – Excellent signal stability through obstacles – Lightweight design ideal for long-range builds – Comes in various connectors (SMA, UFL, MMCX)
Cons: – Slightly longer delivery (about 15 days) – Not the smallest form factor
For under $10, it’s an absolute steal. Similar US-made antennas with this kind of performance start at $25–$30. Rush FPV nailed this one.
US $65.94
![]() |
T-Type 915MHz/2.4GHz Antenna for ELRS & Crossfire
I grabbed this T-Type Dual Frequency Antenna to experiment with both ELRS and Crossfire systems. What drew me in was the dual-band functionality and ultra-lightweight design—great for minimal builds.
It arrived in a simple zip-lock bag but was undamaged and functional. I installed it on an ELRS EP1 RX, and it gave a reliable link up to 1.5km with barely any dropouts. I tested it on Crossfire too—less ideal, but still functional for close-range.
Pros: – Dual frequency support (perfect for ELRS/Crossfire) – Lightweight and compact – Affordable and good signal integrity
Cons: – Wire is thin and needs protection on crashes – No real strain relief at the connector
This was $3.50, and even generic equivalents on US hobby shops are $8+. It definitely met expectations and is great for ultralight micro builds.
US $1.76
![]() |
Pagoda 2 & Triple Feed Patch 5.8G Antenna Combo
I’ve been curious about Pagoda-style antennas for a while, especially when paired with a patch panel. This combo offered both at a price that was hard to pass up—under $9.
Build quality was decent, though not as refined as name-brand antennas. Performance was solid; the Pagoda 2 gave good coverage in tight flying spots, and the patch improved clarity at longer distances. I’d recommend this more for casual park flying or stationary receiver setups.
Pros: – Excellent signal quality for the price – Two antennas give flexibility for different setups – Works well with analog FPV
Cons: – Slightly bulkier design – Needs more secure mounting for rough conditions
You’d pay $25+ for a similar set in the US, so again, this was well worth trying.
US $2.87
![]() |
HappyModel 5PCS Linear Dipole Antennas
These Linear Dipole Nano Antennas were a no-brainer for my fleet of Tinywhoops. At around $7 for 5 pieces, it’s a must-have if you fly Mobula7, Mobula8, or anything lightweight.
Each antenna is tiny, lightweight, and came with UFL connectors that fit perfectly into my VTX. Signal quality is average, which is expected for linear antennas, but they get the job done in indoor or backyard flying.
Pros: – Super light and ideal for 1S builds – Easy to replace after crashes – Affordable 5-pack
Cons: – Limited range compared to circular antennas – Flimsy—definitely not crash-friendly
Still, for micro quads, it’s hard to beat this value. In the US, a single similar antenna often costs $4–$5.
US $1.19
Overall Impression
To be honest, I’m surprised by how good all of these products turned out. I expected some compromises with the low prices, but nearly everything either met or exceeded my expectations. Shipping was smooth across the board, averaging 10–15 days to the US. The build quality was consistently better than I anticipated, and performance was solid, especially considering the price difference compared to US hobby stores.
I’d absolutely recommend these items to anyone into FPV who’s not afraid of soldering or light modding. They’re a great value, especially if you’re looking to outfit multiple drones without breaking the bank. I’ll definitely be ordering more antennas and FPV gear from AliExpress.








