 |
🖨️ CB863 Printhead for HP Officejet 7510/7110/7612
I bought this CB863 printhead because my Officejet 7612 had started streaking and misfiring colors badly. I’d seen this item pop up in top-seller lists, and after reading dozens of reviews, it seemed worth trying instead of replacing the entire printer.
Shipping took about 13 days to Canada — not bad at all. The packaging was surprisingly professional: anti-static bag, bubble wrap, and a foam case inside a small box. Installation was a breeze; I watched a quick YouTube tutorial, and it clicked right in.
Pros: – Revived my printer completely in minutes. – Great color accuracy and no streaks. – No firmware errors or cartridge issues. – Arrived well-packed.
Cons: – The plastic felt slightly thinner than the OEM part. – The initial test print took a couple of runs to clear up completely.
Compared to ordering this part from an official U.S. supplier (around $75–$90), the price on AliExpress — under $25 — was unbeatable. Honestly, I was half-expecting a dud, but this turned out to be one of the best printer part purchases I’ve made. It absolutely met expectations and then some.
US $34.69
 |
🖨️ High-Performance Print Head for HP 932/933
This high-performance CB863 printhead was a backup option I got for my home printer (HP 7510). I liked that it was marketed specifically as a “smooth replacement” and seemed to have solid reviews.
I had it in my hands 11 days after placing the order. The packaging wasn’t fancy but secure. It fit snugly into the print carriage. The test page printed clearly on the second run.
Pros: – Good print quality and color sharpness. – Works smoothly with both genuine and remanufactured cartridges. – Recognized instantly by the printer.
Cons: – Slight chemical smell when unpacking (probably from the cleaning solution). – Took a couple of cleaning cycles to print without any lines.
The price was excellent — I paid about $22, while local U.S. listings hovered around $80. While not quite “factory-new” in feel, it performs almost identically. So far, it’s exceeded expectations.
US $33.47
 |
🖨️ Original 932/933 Print Head for HP 6600/6700
I chose this original 932/933 printhead for a family member’s HP 6700. Their original one had clogged beyond repair, and this seemed like a safe bet labeled as “Original.”
Delivery was surprisingly quick — just over a week. The unit looked refurbished but extremely clean, with zero ink residue on the nozzles.
Pros: – Truly plug-and-play. – Output was sharp right out of the box. – No cartridge recognition errors.
Cons: – Not sealed in OEM packaging. – Slight wear visible under close inspection.
Still, considering I paid less than $28 — versus over $90 for a new OEM head from a U.S. site — this was a win. Print quality has stayed consistent after three weeks of daily use. Met expectations and then some.
US $37.38
 |
🖨️ Printhead for HP Officejet Pro 7110
I bought this printhead for the 7110 as part of a small refurbishing project for an old Officejet Pro. I was impressed by the claim that it was compatible with multiple models and had a long life.
Shipping took about 14 days, slightly longer than others. But the printhead came pre-primed, with protective tape over the nozzles and contacts.
Pros: – Very smooth color gradients. – Easy to install. – Great nozzle alignment.
Cons: – Had to reset the printer once after installation. – Needed a deep clean to start printing cleanly.
The price ($26) was less than a third of what I would’ve paid via HP or Staples. The printhead quality felt nearly new. I’d buy this one again.
US $30.56
 |
🖨️ Clear Color Print Head for HP 6100/6600/6700
What attracted me to this clear print head was the marketing around “clear patterns” and color saturation. I use my HP 6100 to print a lot of photo-heavy documents, so color quality matters.
Delivery was average — 12 days. The build looked sturdy, and I appreciated the protective tape. Once installed, it took just two cleanings before I was seeing vivid reds and deep blacks again.
Pros: – Outstanding color reproduction. – Very clean nozzle printing. – No smudging or fading.
Cons: – Slight alignment issue initially. – Not factory new, clearly cleaned/refurbished.
Compared to $85 OEM alternatives, this $24 printhead is a steal. Color clarity and sharpness met my expectations exactly. A nice surprise.
US $35.63
 |
🖨️ 3PCS Printhead Pack for HP 7510/7110
I ordered this 3-piece pack because I manage multiple Officejets (home, office, and one in a family business). The bulk pricing was irresistible — around $48 for three heads.
All three arrived together, boxed individually in padded mailers. One had some light ink residue, but none were damaged.
Pros: – Amazing value for the price. – Two worked perfectly right away. – Great backup to keep on hand.
Cons: – One of the heads needed multiple cleanings to stabilize. – Not fully sealed units (felt like factory seconds).
Still, compared to $250+ for three new printheads, this was an incredible deal. If you don’t mind the occasional imperfect unit, this pack delivers.
US $13.59
 |
🖨️ CB863-80013A Printhead for HP 6700/7110
This CB863-80013A model came recommended in a few forum threads. I grabbed it specifically for an old 6700 I use occasionally.
Shipping was under two weeks. It arrived in minimalist packaging, but the unit was pristine. It slid into place perfectly, no contact errors.
Pros: – Stable printing from day one. – No issues with driver or firmware. – Sharp black text.
Cons: – Doesn’t look brand-new. – Needed one cleaning pass for full-color pages.
At $23, this is unbeatable compared to U.S. sites that ask $70–$85. For a printer I only use once a week, it’s ideal. Exceeded my expectations.
US $17.67
 |
🖨️ Durable Printhead for HP Officejet 6100–7612
This durable printhead caught my eye because it was labeled “original” and had high user ratings. I needed something long-lasting for my HP 7612 used in a small office.
It took 10 days to arrive. Setup was simple. I ran an alignment test and it printed perfectly with minimal fuss.
Pros: – Feels close to OEM. – No smearing or ink pooling. – Fast print speeds maintained.
Cons: – Slight ink odor upon opening. – Outer shell slightly scratched.
Honestly, for $26, I couldn’t ask for more. It works just like the original, and saved me from replacing the whole printer. Fully met expectations.
US $44.7
 |
🖨️ HTL Full-Color CB863 Printhead
I wanted a printhead that could handle full-color charts and graphics, and this HTL CB863 was marketed as ideal for that. It also had solid compatibility claims.
It took about 13 days to arrive. Visually, it looked clean and almost new. After running calibration, the color output was excellent.
Pros: – Excellent color depth and gradient handling. – No recognition errors. – Smooth operation even at high-speed printing.
Cons: – Not quite as “plug-and-play” as others. – Alignment took longer.
At $27, it competes well with high-end alternatives that are triple the cost. It’s been a solid addition to my HP 7610 setup. Expectations met.
US $36.73
 |
🖨️ NEW Printhead for HP Officejet 6600/6100
This final new CB863 printhead was an emergency buy — my HP 6600 printhead died mid-project. I ordered with fingers crossed and a tight deadline.
It showed up in 9 days — a pleasant surprise. Installation was quick. It took about two test pages, then everything was back to normal.
Pros: – Got me up and running fast. – Clean, sharp output. – Affordable.
Cons: – Packaging wasn’t great — plain bubble wrap. – Needed priming with a paper towel before use.
It was only $25. I would’ve paid $70+ elsewhere just to meet my deadline. This did the job, and I was impressed.
US $17.42
Overall Impression
After testing all 10 of these printheads from AliExpress, I’m honestly surprised — in a good way. I expected hit-or-miss quality, but most of them performed close to OEM. While some had minor cosmetic flaws or needed a cleaning cycle, every single one worked — and at a fraction of the price compared to U.S. suppliers.
If you’re comfortable with light troubleshooting and understand these may be cleaned/refurbished units, I 100% recommend giving them a shot. I’ll absolutely be ordering more in the future — this experience turned me from skeptical to impressed.
