 |
🔧 Watch Case Open Ball – Rubber Friction Ball for Watch Repair
I picked up this Rubber Watch Friction Ball because I’ve been working on my watches more at home and needed something to safely open snap-back cases without scratching them. The 7cm size and grippy rubber texture were a draw—it looked like something even a beginner could use effectively.
The ball arrived in around 2.5 weeks, a bit slower than I hoped but typical for AliExpress. It came well-packaged, no weird smells, and the material felt sturdy. When I tried it on my Seiko 5 and an older Timex, it worked surprisingly well on both. You need to press and twist firmly, but it didn’t slip. No damage to the cases either.
Pros: – Simple, no-scratch tool for watch case opening – Portable and easy to store – Decent grip strength – Doesn’t damage casebacks
Cons: – Doesn’t work as well on deeply-seated or screw-down casebacks – Collects dust easily (rubber texture)
In the US, a similar tool would run $10–$15; I paid less than half that here. Definitely worth it, and it met (even exceeded) expectations for a budget repair tool.
US $0.99
 |
🛠️ Metal Watchband Tool Kit – Strap Remover + Spring Bar Tool
This Watch Band Repair Kit is something I’ve been meaning to get. I was sick of paying a jeweler $10 just to remove a couple links. This one had great reviews and looked like a complete kit with everything needed.
Shipping was under two weeks. The tools arrived in a small plastic case, organized well. I used the strap holder and push tool on a stainless steel Citizen band. Worked like a charm. The build quality is okay—not premium, but totally functional.
Pros: – Comes with everything you need to remove/adjust bands – Works well with steel and leather straps – Easy to use after watching one YouTube video – Affordable
Cons: – The pin remover feels a little flimsy – Not ideal for daily or commercial use
Comparable US kits go for $20–$30; I paid less than $8 here. For personal use, I’m impressed. Met all my expectations.
US $0.99
 |
💎 316L Stainless Watch Buckle – Polished Clasp Replacement
I wanted this 316L Polished Clasp as a substitute for a scratched Rolex-style buckle. This one claimed to be high-quality stainless steel and looked like a good fit for a few of my 20mm leather straps.
Arrived within 14 days. It looked very polished—no sharp edges, solid construction. I installed it in under 5 minutes with a spring bar tool. It’s comfortable and holds tight.
Pros: – Great finishing and solid feel – Fits most aftermarket straps – Looks much more expensive than it is
Cons: – No branding (which is fine, but some might prefer it) – Might not match every watch’s polish
In the US, a similar buckle might be $15–$25. This one was $4.50. I’d say it definitely met and slightly exceeded my expectations.
US $0.99
 |
🧷 Mixed Watch Screws – Micro Watch Movement Screws
These Precision Watch Screws are a must-have if you’re messing with old watches or watch movements. I bought them because I lost a few screws while servicing a Miyota movement and needed various sizes.
They came in a tiny packet with a random assortment—pretty well organized. I tested a few on different calibers and surprisingly, many fit perfectly. Not Rolex-grade precision, but good for hobby repair.
Pros: – A wide variety of screw types and lengths – Good for DIY repairs and replacements – Cheap and ships fast
Cons: – No size labeling (trial and error) – Not suitable for ultra-high-end movements
Price-wise, these would cost double in the US. I paid under $3. They met my expectations for backup parts.
US $3.41
 |
🔩 16pcs Watch Spring Bar Set – Removal and Replacement Tools
I grabbed this Watch Spring Bar Set as I was looking for a reliable spring bar tool with multiple size bars. I needed something better than the flimsy $1 eBay tools.
The tool included feels way more solid than I expected. The tips are well-machined and don’t bend easily. I swapped straps on three different watches with zero issues.
Pros: – Durable spring bar tool – Comes with a range of bar sizes – Great control and precision
Cons: – Limited bar diameter range – Not for fat spring bars (like Seiko divers)
US price? Around $10–$15. Paid $5 here. Excellent value. Totally met expectations.
US $2.78
 |
📦 270pcs Stainless Spring Bars Set – Watch Strap Pins
This 270pcs Spring Bar Kit was a no-brainer. I wanted a full range of lengths for different watches and this one had everything from 8mm to 25mm.
It came in a clear box with all sizes separated. Tested them on Casio, Timex, and even a Seiko. No issues—tight fit, decent spring strength.
Pros: – Huge selection of sizes – Fairly strong springs – Well-organized box
Cons: – Some sizes had fewer pieces – Not all perfectly centered
You’d pay $20+ for this in the US. This cost $7. Definitely exceeded my expectations.
US $0.99
 |
⏱️ Silver Watch Crown 3.5–7mm – Flat Tube for Watch Repair
This Universal Watch Crown was for replacing a missing crown on a vintage watch. The variety of sizes made it ideal for testing fit.
Shipping was fast—around 10 days. Tried the 5.5mm crown with a flat tube stem; after trimming and fitting, it worked great.
Pros: – Clean threading and finish – Fits well with flat stems – Good for vintage watches
Cons: – No included stems – Requires careful fitting (not beginner-friendly)
Would cost $10+ in the US. Paid $2.50. Met expectations and then some.
US $1.36
 |
💍 Gold & Silver Watch Crown for Rolex – Assorted Sizes
Needed a Rolex-Style Crown Replacement for a Sub homage project. This set came with multiple sizes and stem types.
Build quality surprised me—sturdy and clean. Used the 6mm gold one and it matched the case beautifully. Threaded smoothly onto a stem I had.
Pros: – Great value for multiple sizes – Matches gold/silver cases – Easy to polish and install
Cons: – Not branded – Tube not included
Would be $25+ in the US. I paid $3.50. Exceeded expectations.
US $4.88
 |
📏 Double-Sided Watch Dial Tape – Adhesive Strip for Movements
I ordered this Watch Dial Adhesive Tape to secure dials on a few quartz movements I was working with. The tape looked thin but strong in photos.
It came in a flat envelope, 2 sheets with multiple strips. Surprisingly sticky and thin. Used it on 3 movements and dials held securely without warping.
Pros: – Very thin but strong – Doesn’t leave residue – Multiple strips per sheet
Cons: – A bit tricky to peel – Not suitable for thick or domed dials
This would be $7–8 in the US; I paid around $1.50. Absolutely exceeded my expectations.
US $0.99
 |
💨 Watch Air Blower – Rubber Dust Cleaner Ball
This Rubber Air Blower is essential if you deal with dial cleaning or movement handling. I was attracted to the compact size and anti-static claim.
Used it to clean dust from a skeleton dial—strong airflow and nice ergonomic design. Doesn’t smell like rubber (which is common with cheaper ones).
Pros: – Solid rubber – No odor – Effective airflow – Anti-static
Cons: – Small size limits air volume – No nozzle extension included
US version? Easily $10. Paid under $3. 100% satisfied.
US $0.99
 |
🌀 3135 Movement Stems – Winding Stem Replacements
I got this Set of 3135 Movement Stems to test with clone ETA and Asian Rolex-style movements. They came in a small tube, pre-cut and ready for trimming.
Fitted one onto a 3135 clone and it worked well after some filing. Good steel quality and threading was clean.
Pros: – Multiple quantity options – Durable – Easy to shape/trim
Cons: – Needs cutting tools and patience – No sizing guide
Price comparison? Around $5–6 each in the US. I got 5 for $4. Met expectations and then some.
US $3.42
 |
🧺 Watch Parts Cleaner Baskets – Stainless Mesh Trays
Finally, this Watch Parts Mesh Basket was a smart pickup. I needed something for ultrasonic cleaning. This one had a sturdy mesh and secure lid.
Used it with some screws, gears, and plates. Mesh was fine enough to prevent small parts from slipping out.
Pros: – Good-quality stainless – Locking lid stays secure – Fits most ultrasonic cleaners
Cons: – Only one included – Slightly smaller than expected
In the US, something like this is easily $12–15. Paid $4.50. Totally met my expectations.
US $0.99
Overall Verdict: Honestly, I’m surprised how well all 12 items performed. I expected some duds, but everything was usable—and some exceeded my expectations by a lot. The savings compared to buying these watch repair tools and accessories in the US were huge. Shipping times were reasonable, and everything arrived intact. I’d definitely recommend these to fellow hobbyists or DIY watch repair fans. I’m already planning my next AliExpress haul.
